HCM 3080 Founders Edition Waterblock Acrylic + RGB
Waterblock ELITE SERIE
RTX 3080/3090 Founders Edition (only)
Top-of-the-range materials, design precision, optimization of the passage of the coolant, this unprecedented GPU waterblock for this new range of graphics cards represents everything that HCM can do best.
The entire internal part of these new waterblocks has been redesigned, optimized, and brought up to standard.
All our Elite Series waterblocks are resistant up to a pressure of 1 bar maximum.
The sides of the acrylic tops are perfectly polished.
The base of the water block has been entirely designed to give you the best possible performance. Made of C110 copper (99.95% pure) then plated with electroless nickel, this finish guarantees you foolproof protection.
Each chip on your graphics card and in contact with our industrial grade thermal pads with a thermal conductivity of 5w / mk.
50 micro-channels and 50 0.4mm micro-fins in 99.96% pure copper
Thermal pads cover all hot spots on the board
• Transparent top, black acetal
• Full copper C110 electroless nickel plated • Cooling base with 0.4mm micro-fins • Cooling PCB assembly
• Allen key.
• Thermal pad 5w / mk.
• Waterblock GPU.
Notice: Clean with Microfiber cloth
Use suitable and non-electrically conductive coolants!
The use of Mayhem branded fluids voids the warranty.
Use at your own risk.
Statement from the manufacturer:
⚠️ HYBRID COOLING MODDING guarantee does not cover electronic components. Assembly of the waterblock is done at your own risk. ⚠️
Shipping is free to the US, $25 for international.