S401 Custom White Edition
Out of stock
Includes custom white removable handle and custom white SF600 platinum PSU with black-sleeved cables.
Shipping to "lower 48" US states is flat $20 fee.
Salvo Studios S401
Out of stock
All S401 cases have been sold! I have already begun designing the S402 which I have planned for availability late fall 2019.
The S401 is Salvo Studios' flagship product for the mITX form factor. Enjoy the ability to orient the chassis in two different ways thanks to the removable stands (thumbscrews) or update that old HTPC with the horizontal orientation of the S401 without the concern your airflow will be restricted.
Check out our custom wood and acrylic side panels as well as the removable handle!
Shipping to "lower 48" US states is flat $20 fee.
60mm x 60mm x 15mm PWM Fan
These are brushless 60mm fans that can be installed in the S401 case for chassis cooling. The specs for the fans are as follows:
Voltage: 12V
Current: 0.24A
Speed: 5833RPM
Air Flow: 27.9CFM
Noise: 35dBA
Watt: 2.88W
Comparable Delta model AFB0612VHC which typically costs up to 3x more.
S401 Removable Handle
Out of stock
S401 Custom Acrylic Vented Side Panel
This is the acrylic/wood side panel that is laser cut and includes new thumb screws for mounting to the vented side of the S401 - available in many colors. Due to the need for the vented pattern, logos will be limited to 1" x 2" in size and will be centered at the top of the panel just above the vents. Pictures coming soon!
Acrylic Thickness 0.220"
These will increase the width of the S401 by 0.12" per panel. The thumbscrews also will increase the width of the case by an additional 0.25".
Related: Custom Solid Side Panel for S401
S401 Custom Acrylic Solid Side Panel
This is the acrylic side panel that is laser cut and includes new thumb screws for mounting to the back (solid) side of the S401 - available in many colors. Custom logos can be engraved up to 8" x 10" in size. Pictures coming soon!
Acrylic Thickness 0.220"
These will increase the width of the S401 by 0.12" per panel. The thumbscrews also will increase the width of the case by an additional 0.25".
Related: Custom Vented Side Panel for S401
S401 Custom Demciflex Vented Panel Filter
This is a custom-size Demciflex filter to be used with the S401 on the vented panel. This magnetic filter can be easily removed for cleaning.
Size:
O/D 306mm x 293mm
I/D 278mm x 265mm
Height:
< 2.5mm thick for ferrous filters
This filter includes the peel and stick magnetic frame for non-ferrous applications.
S401 3.5" Disk Stacker (1 set)
These 3.5" disk stackers will allow S401 owners to add 3.5" drives vertically to their existing S401 configuration. These 3.5" stackers will allow for a 2 x 3.5" drive configuration per stack. Made from 0.04" stainless steel, these brackets wilI resist warping/bending and never rust.
If a PCIe device is installed inside your S401, please take note of clearances mentioned below as interference may prevent these from being used if the PCIe device is too long. Two 3.5" stackers cannot be used with any PCIe device due to interference. A single, short PCIe device may be used with one 3.5" stacker. The maximum length of a PCIe device when used with the 3.5" stacker is 200mm.
S401 2.5" Disk Stacker (1 set)
These 2.5" disk stackers will allow S401 owners to add 2.5" drives vertically to their existing S401 configuration. These 2.5" stackers will allow for a 6 x 9.5mm, 5 x 12mm, or 4 x 15mm drive configuration in per stack. Made from 0.04" stainless steel, these brackets wilI resist warping/bending and never rust.
If a PCIe device is installed inside your S401, please take note of clearances mentioned below as interference may prevent these from being used if the PCIe device is too long.
Maximum PCIe Length with 2.5" stackers installed:
1 x 2.5" stacker: 240mm
2 x 2.5" stacker: 115mm
3 x 2.5" stacker: 44mm
S401 Side Panel Spacers
Order now to have shipped by 4/5/19.
With these panels you can add an additional 5.6mm to the clearance of the vented panels which also increases the CPU heatsink clearance to 57mm from 52mm.
Included with this kit are 8 extra long #6-32 screws with powder coated heads to match the black finish on the S401. Also included are the extra long thumbscrews needed if you have the custom acrylic panels as well.
Now shipping version 2! The design has been modified to allow the spacers to be installed on either side of the S401. The spacers are no longer side specific.
